Autowatch Ghost Immobiliser Installation
The Ghost is the most advanced aftermarket in the UK. immobiliser for the CAN bus. It is discrete and does not have LED indicators or key fobs, and is concealed in the wiring of your vehicle.
The user can also deactivate the system temporarily by using Transport Mode when renting out their car. This guide will walk you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle from key cloning, hacking and relay attacks. The system is connected directly to the ECU of your vehicle and secured by a PIN code that you choose. It is undetectable by thieves using diagnostic scanners or other modern methods. It cannot be disabled with circuit cuts.
The system is easy to use, however professional installation is advised to ensure a perfect connection with the ECU of your vehicle. Installers approved by Thatcham can assist with the installation and programing of your Ghost system. They can also recommend a tracking system or alarm to complement your vehicle's security package.
First, the installer needs to disconnect your battery to prevent accidental airbag deployment or short circuits. After the battery has been disconnected, the installer may start working safely. Basic hand tools are useful for securing connections with precision and a multimeter can be used to check the electrical properties and safety. Cable tie and insulation tape are crucial to ensure connections are secure and ensure that wiring is neat. In addition, the user's manual provides specific guidance specifically tailored to the Ghost Immobiliser model you have.
During the installation process, it's crucial to select the right grounding location that is free of any paint or debris. The installer should also make sure the immobiliser's CAN H as well as CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be plugged in or soldered based on the model. To ensure a stable and long-lasting connection it is recommended you choose a high-quality plug.
Once the install is complete After the installation is complete, the customer can turn on the Transport Mode. ghost 11 immobiliser allows the vehicle to be utilized by valet parking companies or mechanics without needing to know the pin code. The user must press the icon for service on the dashboard five times over 2 seconds. The system will confirm this by displaying five indicators.
The Autowatch Ghost 2 is a highly efficient immobiliser that's TASSA verified and Thatcham approved. It's an excellent option for those who regularly rents out their vehicles through platforms such as Turo. Immobilisers can also lower insurance costs since it reduces the likelihood of theft.
Getting Started
If you're seeking a solution to protect your vehicle from thieves it is best to go with an autowatch ghost immobiliser. The device protects your vehicle from starting even when a criminal steals or copies the key. This is due to its advanced technology, which is designed to prevent the engine from running unless the correct PIN code is entered.
The device connects to the vehicle's bus system CAN, allowing direct communication with the ECU. It makes use of the buttons on your steering wheel and dashboard to create a unique sequence which only you know. This makes it impossible for anyone else to start your vehicle. This is the ultimate system to safeguard your pride and joy. It will keep its value intact should you ever decide to sell it.
Installing a ghost immobiliser can be an easy procedure, but it is crucial to follow the instructions carefully to avoid electrical issues and system malfunctions. First, you need to locate and identify a constant 12V power source as well as a good grounding point on the chassis of your vehicle. Then, you can begin to connect the wires for the immobiliser. Make use of high-quality connectors and soldering methods to create a secure connection. Also, ensure that you insulate the connections with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other problems.
Once the wires are connected, you are able to reconnect the battery and start the engine to test the function of the immobiliser. If everything is functioning properly then you can put it in a secure place under the dash or somewhere else in the vehicle. Be sure to conceal it in a secure manner so that thieves can't tamper with it.
The Ghost 2 immobiliser has been TASSA (Tracker and Aftermarket Security System Association), which means it is a top-quality deterrent for car thieves. It is impervious to hacking and key cloning and cannot be disabled without a code. The device is also easy to use and can be set into a service valet mode so that your vehicle will not be activated when you take it in for maintenance or an MOT.
Wiring
The Ghost Immobiliser is a cutting-edge security system specifically designed to deter theft of vehicles. It communicates with your vehicle's ECU and connects directly to its CAN bus. Unlike other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings for your vehicle.
It's also completely undetectable to thieves using diagnostic scanning devices. The system doesn't send or receive radio frequency signals and instead uses CAN data for communication with your ECU. In addition, it doesn't need any modification to your car's existing key fobs.
Enter the sequence to disarm (either two or one button) and then switch on the ignition in your car to activate Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. You are now able to begin driving your car in a safe manner.
Once installed, the Ghost Immobiliser will safeguard your vehicle from key cloning and hacking and will also protect the value of your car's pride and joy. In Transport Mode you can temporarily disable the Ghost Immobiliser in case you have to hand your car over for service or valet parking.
You'll require a continuous power source (12V) and an earthing point to complete the installation of a Ghost immobiliser. Make sure both are well-insulated and able to be touched. Cable ties are also suggested for bundling and secure the wires. This reduces the risk of theft by potential thieves. To avoid committing mistakes, make sure to double-check these points and mark them using the use of tape or labels. It's important to check every connection for signs of wear and tear. Be sure to ensure that all connections are in place, and properly sealed. Finally, don't forget to test the Ghost Immobiliser after the installation is complete. This will make sure that the unit functions correctly and that all connections and insulation are safe. If you encounter any issues, you must be certain to fix them immediately.
Testing
The Autowatch Ghost Immobiliser is an innovative vehicle security system that is integrated into your car's ECU to stop unauthorized engine start. Its cutting-edge technology protects your vehicle from hacking and key cloning along with other common methods employed by thieves to steal vehicles. The Ghost works in conjunction with existing alarm and tracking systems to provide the best protection for your vehicle. The Ghost's unique features and subtle design make it a popular choice for car lovers and security-conscious motorists alike.
To ensure proper integration of the Ghost Immobiliser, it is essential to follow every step of the installation process. A good starting point is to refer to the wiring diagram of your vehicle that serves as a roadmap for locating and connecting the necessary wires. Then, you'll need to identify the power source and grounding points. Once these are found you'll need to mark them so that they're easily identifiable during the installation process. In addition, it is vital to use only the best tools and materials. Basic hand tools can assist you in making precise connections. A multimeter will verify electrical values, and ensure security. Insulation tape and cable tie will ensure that all connections are tidy. autowatch ghost 2 immobiliser -specific user's manual is also available.
It is crucial to test the system prior installing it. Enter the PIN code into the system and start the vehicle. This will ensure that the immobiliser functions as intended, preventing unauthorised vehicle starts. It's recommended to perform this procedure regularly as part of your routine vehicle inspections to ensure that the system is working correctly.
After the installation is completed After the installation is completed, you are able to drive your vehicle with confidence. The Ghost will safeguard your vehicle from would-be car thieves. It will ensure that no one is able to take your car away without having the correct PIN code. The Ghost can also be paired with a Thatcham-approved tracker to identify any attempts at tampering or theft that could lead to the location of your vehicle if it's stolen.
The Ghost is compatible with a wide variety of vehicles, including those from most major manufacturers. If you're interested in protecting your car using this advanced device, contact Monty's Locksmith today to find out more about our installation and service options. We are a TASSA Installer who is registered which guarantees that we adhere to strict standards and procedures for installing our products. This guarantees customers, insurance companies, and law enforcement agencies that installations are done safely and properly.