Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. With the added option to link to a Ghost app and GPS tracking system that can notify you via phone if your car is tampered with or stolen.
Installing an Ghost immobiliser is a breeze for the skilled technician. The right tools, insulation tape and heat shrink tubing is essential.
Getting Started
In contrast to physical security devices like wheel locks and car alarms, ghost immobilisers safeguard your vehicle without the use of key fobs or LED indicators. They are directly connected to the ECU CAN data network and can only be activated after entering a PIN code. This provides a more secure level of protection from key hacking, cloning and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a high level of agility and accuracy. It's like walking through a minefield. A single mistake could cause serious damage to your vehicle's circuits. To avoid this, it's essential that you understand the installation process and prepare your vehicle accordingly.
The first step is to prepare the vehicle by taking out interior panels to make space for the immobiliser unit. Once you've found the ideal location to hide it put it in place by using cable ties to stop it from being removed or tampered with. Then, tidy up the wiring by tying down loose wires and using insulation tape or heat shrink tubing to cover exposed connections. This reduces the chance of a short circuit that is not intended to happen and improve the appearance and reducing the chance of theft.
Finally, identify a source of continuous 12V power and a grounding location for the ghost immobiliser. Once you've located them test the power cables using a multimeter. Connect the CAN H and CAN L wires of the immobiliser to the grounding and power points.
Once you've made all of the connections required It's crucial to double-check the connections and examine the immobiliser for signs of corrosion or other damage. Also, test the system to make sure it's functioning properly by entering a PIN code and starting the engine. This should be a regular part of your daily routine, as it will allow you to identify any intermittent problems early. Regular testing will help prolong the life of your device and keep it running at its peak.
Preparing the vehicle
Installing a Ghost immobiliser requires knowledge and tools. A wiring diagram of the vehicle is essential to locate the right wires and making accurate connections, while a multimeter can help verify electrical values and ensure security. Insulation tape and cable ties can be used to protect the connections from tampering and keep them secured. A user's guide will provide specific directions specific to the Ghost Immobiliser model you have.
Once installed, a ghost immobiliser can stop an unauthorised engine from starting by requiring the owner to enter a unique PIN sequence by pressing buttons on the steering wheel or centre console. This can be accomplished manually or remotely through a mobile phone app, and the code can easily be modified by the vehicle's owner at any time. The device is also silent and is undetectable by thieves as it does not emit any radio frequencies.
A ghost immobiliser is connected directly to the vehicle's CAN bus. It is a network that connects to all of the electronic control units (ECUs). It intercepts the signals transmitted by ECUs and shuts down the engine if a false signal is identified. The system is tamperproof and weatherproof, but it does not have key fobs or LED indicators to draw the attention of thieves.
It can be placed behind or in a less visible location so that it's not visible to thieves, and does not interfere with vehicle performance. It could even be placed inside a small, compact box which makes it less likely to be spotted during the test drive by unscrupulous salespeople for cars.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system, can be a powerful deterrent to modern car theft methods like signal relay attacks and key copying. The system can be combined with other security measures to create a formidable barrier that can thwart even the most ardent thieves. This is why more and more insurance companies are now advocating or even requiring ghost immobilisers be fitted, as it will significantly lower monthly premiums.
Making Connections
Unlike traditional security systems that are heard by thieves, ghost immobilisers work silently to keep them from being aware that your vehicle has been switched on. They also block high-tech methods of theft, such as OBD hacking. They can also be fitted without causing permanent marks in your vehicle, making them an excellent choice for people who plan to sell their vehicle in the near future.
The Autowatch Ghost 2 is a immobiliser for CANbus that is one of the most reliable and current solutions to protect your car from theft. It shuts down your engine by using the CAN data network and generates a unique PIN code that is difficult for criminals to guess. It can be used in a wide range of automobiles, and it can work with many features already installed including car alarms and steering wheel locks. GPS trackers, and door lock bypass.
If you decide to opt for an Ghost immobiliser, be sure to check the wiring diagram for your particular vehicle model to identify the wires that require connecting. Check their locations to ensure they are correct, and then label them or tape them to help remember them. You'll also need to locate a constant power source (12V) for the system as well as an earthing. Once these are in place, you can start to make the connections needed to complete the installation.
If the ghost immobiliser is connected to your CAN bus, it will block your vehicle from starting until you enter a pin code through the buttons on the steering wheel or dashboard. This will stop ECU cloning as well as other methods of vehicle theft. Additionally, it can be paired with other approved by Thatcham security accessories, such as alarms and tyre clamps to provide your vehicle with an even greater level of protection.
As the UK automotive aftermarket industry continues to grow as are the options for securing your vehicle. With so many options for thieves to break in and take your car, it's vital to do everything you can to prevent it from being taken away. That's why ghost immobilisers have become an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it very difficult for thieves to steal your key fob and then start your vehicle, and more difficult to disable the system through hacking into its electronics.
ghost 11 immobiliser can also be used together with GPS tracking devices, which can aid in tracking your vehicle's location and identify it if it's stolen. This feature isn't often found in aftermarket security products, but it is an excellent way to improve your vehicle's security and provide you with peace of mind.
The Ghost-II immobiliser not only provides an enhanced security, but also a pleasant experience for the user, by eliminating the need to use additional key fobs or devices. It has an easy and intuitive PIN code entry system that seamlessly into your daily routine. It also comes with convenience features and deactivation options that let you temporarily disable the immobiliser in order to park or service your vehicle.
Make sure you have the tools you need and become familiar with the wiring of your vehicle. A basic set of tools will allow you to make precise connections. A multimeter can be used to verify electrical values. Insulation tape and heat-shrink tubing are vital to safeguard connections from short circuits. Cable ties can be used to secure wiring. It is also essential to work in a space which is well-lit and wear protective gear when working with electrical tools and components.
After you've completed the installation, you must test the Ghost immobiliser to make sure that it's working properly. You should first try to start the car without entering the PIN. If this fails, you'll need to test the system again and perform a more thorough examination of the connections.
The Ghost Immobiliser, unlike other security systems, is a secret device which cannot be detected by thieves. It is also more efficient than physical deterrents, such as wheel clamps and steering locks. It is TASSA acknowledged and approved by a few insurance companies, making it a cost-effective investment that can give you the peace of mind you need.